STC Electronics New Items
New Equipment Added to Lineup
July 26, 2010 - STC, Inc. recently added two new components to it's array of production equipment, increasing product versatility and decreasing production time for PC-mount transformers and mid-size toroids.
The new laminator, an HBR Industries product, is used to manufacture one of STC, Incorporated's benchmark products.
"The products we make most often with the new laminator are the low-profile transformers that are mounted on printed-circuit assemblies," says Vice President of Operations Angie Calkin.
These parts are most commonly used in electronics applications where vertical space is very limited but a relatively sizable output voltage is still required. Refer to the LPC Transformer page on this site for more information about these types of transformers.
"The biggest advantages that come from having this laminator are the versitility it offers and the quick turnaround time in production," says Calkin. "Our low scrap level from using this laminator has also been very impressive."
The other new piece of equipment, a mid-size Gorman Productor II toroid winder, also benefits electronics applications with limited space.
As with the new laminator, the new winder allows STC to build a wide variety of toroids. It also enables building products that are not feasible to be built by hand.
"Some toroids require several hundred turns of wire, which is very challenging to do by hand," says Design Engineer Les Vaughn. "Others require very small-diameter wire, and this winder can handle those types of jobs."
"These kinds of toroids are used for a lot of circuit board assemblies, especially the very small boards that require miniaturized components, so the benefits of having this new winder are many."
The Secret Life of an STC Intern
January 5, 2010 - Nick Freed wrapped up his spring semester at St. Louis University last May. At that point, he had to decide how to spend his summer before returning to school in the Fall.
The options for a young college student are many. Two months backpacking through Europe? Studying abroad at the University of Pimpleton? Sitting at home in pajamas eating pizza and playing video games?
Nick knew a summer internship would be the most beneficial option in the long run. As an aerospace engineering student, he also knew applying one of the many associated engineering fields would help as well. So when he saw the ad for an engineering position at STC, Nick felt his stomach tighten and his spirits swell. After throwing away the pizza boxes and taking some antacid, Nick contacted STC.
To Nick, aerospace engineering is the perfect combination of all the engineering fields that pique his interest. It encompasses everything from fluid dynamics (an aircraft's movement through air) to chemical engineering (materials used to fuel a rocket). But would an internship at STC provide experience in any of the associated engineering fields?
In short, yes it would.
Take, for example, the simple task of getting a cup of coffee for a senior staff member (me). This task incorporates Fluid Dynamics ("Nick, get me some coffee!"), Thermodynamics ("Make sure it's hot, but not too hot."), Materials Engineering, ("Oh, and put it in my favorite mug."), Chemical Engineering ("Remember to use the pink sweetener."), and even Physics ("Whoops, I spilled it in your lap, boss."). I can't be sure, but that last remark seemed just a bit sarcastic.
In truth, Nick (a.k.a. "Nick the Intern") hasn't retrieved so much as one cup of coffee for anyone at the plant. However, he has been very helpful with some important projects. He was our turn-to guy when we purchased a new Watlow F4D Controller, which is used to run test profiles for our environmental chamber. He performed numerous quality assurance tests and helped write procedures for these tests.
As crazy as it sounds, Nick says those QA tests may have been the most enjoyable part of his time at STC.
"The QA testing was beneficial because I was sort of the company's promise to the customer that our products would work as advertised."
Nick recently returned to work at STC during his Christmas break, and will be leaving us again soon. The Watlow controller is still running environmental tests and the QA tests are still being conducted as designed. Thanks Nick, and best of luck!
STC Recertified to ISO 9001:2008
December 3, 2009 - During November of every year, we here at STC start feeling a little festive. An excitement fills the air, and workers throughout the plant await the arrival of a special visitor.
Yes, that's right. It's time for a visit from our independent auditor to verify that our quality processes continue to meet ISO standards.
Since 1999, STC has been certified every three years to ISO standards. Each May and November we welcome our auditor back for a surveillance visit to ensure that the various aspects of our manufacturing process are being performed properly. This year marks the second straight year that we've met the updated ISO 9001:2008 standard.
I recently visited with Angie Calkin, who serves as Vice President of Operations, to ask her about the importance of meeting ISO standards.
Q: STC, Inc. has met ISO 9001 standards since 1999 and has been recertified every three years since then. Why is this done?
A: We have some customers who either require it or would want to do their own process audits at the plant if we weren't certified. But it's more than that. We have other customers who don't require that we meet ISO standards but still benefit because we do.
Q: How so?
A: When we implemented our quality system, we saw a steady decrease in both customer concerns and customer returns, and that applied to all of our customers because the same process is followed for every product and in every phase of manufacturing.
Q: Have the quality processes helped make STC more efficient?
A: The ISO standards are intended to improve overall quality rather than reducing manufacturing time, but we do spend less time correcting production errors so we can factor in that aspect of it.
Q: Are there other benefits?
A: In cases where we submit our products for consideration on large projects, the customer will have a list of standards we must meet before we can be considered. For the most part, we can show the customer that we already meet their requirements—and have for many years—because their requirements are already part of our ISO quality processes.
Next, I spoke with Brad Cross, president of STC, Inc., to get his thoughts on the whole quality process.
Q: Having recently completed another ISO recertification, what are your thoughts about the importance of this event?
A: The first thing that comes to mind is that it's a real tribute to the diligent work of our Quality Manager Angie Calkin and the rest of the staff who have taken our quality processes very seriously. They've recognized the importance of our quality procedures and the resulting benefits to our customers.
Q: What types of customer benefits have you noticed?
A: One big improvement that we made while implementing this process was pre-testing. Before we start full production on an order, we test two or three units to make sure they meet exact customer specifications. After a unit passes pre-testing, we can produce the full order. That way, we don't complete production on an order then find out we missed a slight detail.
Q: Is this testing done for both electrical and mechanical specs?
A: Yes. Of course, we also perform 100 percent testing on all of our parts after production is complete—and pre-testing really helps decrease the number of errors we find at that point. A huge part of our quality improvement is the longevity and experience of our staff. If you've got people like Randy Kaufman [Senior Test Technician at Sun Transformer], who knows exactly what to expect with each part, they're going to recognize when something isn't quite right, and they make sure the issue is corrected before we ship them out.
STC Increases Testing Capability
October 5, 2009 - In an effort to further increase testing volume—and to ensure that all manufactured components may be tested to NEMA standards—STC Electronics has recently added a Despatch Ecosphere environmental chamber to it's array of test equipment.
According to Electronics Technician Steve Lescalleet, utilizing this type of equipment is an essential part of the electronics manufacturing process.
"The environmental chambers put our products through temperature extremes that they'll probably never see out in the field," Lescalleet says. "If the units can work properly through this type of testing, there's no question in our minds about whether they can withstand real-life extremes."
Depending on customer requirements, the environmental testing performed by STC Electronics may include various tests that cover operating voltage, high and low temperatures, humidity, vibration, and shock (as defined by NEMA TS2 standards).
Lescalleet points out two primary objectives when it comes to performing these demanding environmental tests.
"The first objective is to find weaknesses in product design, and we do this kind of testing on prototypes so we can eliminate these weaknesses before we begin full-scale production. The second objective is find weak points in our assembly process so our production methods can be continually improved."
So which of the many environmental tests performed by STC is the most demanding for electronics components?
"The tests related to low-temperature limits present the biggest challenge, no doubt," says Lescalleet. "When a unit has been subjected to our low-temperature tests, they've essentially been through a really, really bad winter. And If a unit doesn't pass the required tests, it doesn't leave the plant."
Les Vaughn Celebrates 20 Years with STC
November 05, 2008 - Design Engineer Les Vaughn recently celebrated his 20th anniversary with STC Electronics. In 1988, Les joined STC Electronics and worked primarily in designing and building the test fixtures that were used to verify proper performance before units were sent to customers.
Prior to joining the company, Les had completed a degree in electronics and had worked as a radio broadcast engineer, as well an on-air personality. This experience and training proved beneficial as he took on a greater and greater role in the design of circuit layouts for customers.
Les' current job responsibilities include working with customers to define requirements—as well as building and testing prototypes to meet these requirements. He also designs transformer power supplies and even avails himself when needed for difficult production equipment repairs.
When asked where he gains the most satisfaction from his job, Les doesn't hesitate.
"When I talk to a customer and they have just a basic idea of a requirement, and I can build a part that they need and can use. That's when I get the most satisfaction."
Congratulations Les!
Linda Shaw Celebrates 20 Years with STC
July 24, 2008 - Linda Shaw recently reached the 20-year milestone with STC Electronics. In 1988, Linda began working at STC Electronics as part of the Production Team. After five years in this position, she was promoted to Production Team Leader, where she currently serves.
Linda's responsibilities include assigning job tasks, supervising production procedures and quality, measuring build times, and training production personnel. Linda also assembles transformers and offers a wealth of knowledge about proper production methods for all types of STC products.
Linda has received extensive ISO 9001:2000 training, and she works closely with the Design Engineers in creating and testing prototypes. She has also worked with UL inspectors during the approval process for STC Electronics products.
Congratulations Linda!
Lescalleet Joins STC as Electronics Technician
May 22, 2008 - Steve Lescalleet has joined STC, Inc. as an Electronic Technician. In this role, Steve is responsible for the proper assembly and testing of several STC products. Steve holds a degree in Aviation Elecronics from Southern Illinois University as well as FCC and FAA certifications. Steve has over 20 years of experience in electronics, including work in avionics for American Airlines (TWA). His interest include general aviation (private pilot license), electric cars, and solar power. He is a welcome addition to the Sun Transformer team.
Kolts joins STC as Communications Manager
March 12, 2008 - Scott Kolts has joined STC, Inc. as Communications Manager. In this role, Scott is primarily responsible for developing product manuals, company marketing material, and web sites. Scott has ten years of experience in technical writing and marketing, and he is a welcome addition to the STC team.
Calkin Promoted to Vice President of Operations
February 17, 2007 - Angie Calkin, an 18 year veteran of Sun Transformer, was promoted to the newly created post of Vice President of Operations. Angie will be responsible for manufacturing operations at Sun Transformer's facility in McLeansboro, IL.
STC celebrates 20 years of excellence
October 5, 2006 - STC, Inc., Electronics Div. has been supplying customers with the best quality in printed circuit assemblies since 1986. We appreciate both the customers who have been with us since the beginning and those who may have just discovered STC Electronics.
STC preparing for RoHS/WEEE Compliance
October 5, 2005 - STC Electronics is preparing to meet the schedule for compliance mandated by Europe's RoHS/WEEE (lead free) directives on effected products. If you need information about the compliance schedule or requirements for items you purchase from STC Electronics, please contact Les Vaughn at sales@stcelectronics.com or 618-643-2555.
STC named "Small Business of the Year"
June 8, 2004 - STC, Inc. was among several businesses and individuals receiving recognition at the annual Legislative Recognition Breakfast held June 7, 2004 at Southeastern Illinois College. The event was held in conjunction with National Small Business Week. Tammy Weston, director of Southeastern Illinois Regional Planning and Development Commission presented the award. Brad Cross accepted the award on the behalf of STC, Inc.
Copper Prices Keep Rising
January 1, 2004 - Copper, an essential component of virtually all electronic assemblies continues to climb the cost ladder.
Detailed historical charts of copper market prices can be found on the internet at http://futures.tradingcharts.com/chart/CP.
The "base price" or the cost magnet wire suppliers pass along for the copper content in wire is typically $0.35 higher than the "High Grade Copper" price shown in most market charts.
